Common Tree Problems and How Arborists Can Help

Trees are invaluable assets to our environment, providing shade, oxygen, and beauty to our surroundings. However, like all living organisms, trees are susceptible to a variety of problems that can threaten their health and vitality. From pests and diseases to environmental stressors, trees face numerous challenges that require expert attention. In this article, we’ll explore some of the most common tree problems and discuss how arborists play a vital role in diagnosing and addressing these issues.

Pest Infestations

One of the most common problems trees encounter is pest infestations. Insects such as aphids, scales, borers, and caterpillars can wreak havoc on a tree’s foliage, causing wilting, discoloration, and even defoliation. Arborists are trained to identify the signs of pest infestations and determine the most appropriate course of action to mitigate the damage. This may involve the application of insecticides, the introduction of beneficial insects, or implementing cultural practices to reduce pest populations.


Trees are also susceptible to a wide range of diseases caused by fungi, bacteria, and viruses. Common tree diseases include powdery mildew, root rot, anthracnose, and Dutch elm disease, among others. Arborists are skilled in diagnosing tree diseases based on symptoms such as leaf spots, cankers, and dieback. They can recommend treatments such as fungicides, pruning infected branches, or improving soil drainage to help trees recover from disease.

Poor Soil Conditions

Healthy soil is essential for the growth and development of trees, but many urban environments suffer from soil compaction, poor drainage, and nutrient deficiencies. Arborists can assess soil conditions and recommend appropriate soil amendments to improve tree health. This may include aerating compacted soil, adding organic matter, or adjusting pH levels to create a more hospitable environment for tree roots.

Structural Issues

Trees with structural problems such as weak limbs, codominant stems, or root defects pose a safety risk to property and people. Arborists are trained to identify structural issues during tree inspections and can recommend corrective measures to reduce the risk of failure. This may involve pruning to remove hazardous branches, installing support systems such as cables and braces, or even tree removal in extreme cases where the tree cannot be safely preserved.

Environmental Stress

Trees can experience stress due to factors such as drought, extreme temperatures, air pollution, and soil compaction. Arborists can help alleviate environmental stressors by implementing measures such as supplemental watering, mulching, and proper pruning techniques. They can also recommend tree species that are better adapted to local environmental conditions to ensure long-term health and resilience.

Construction Damage

Construction activities can have a significant impact on nearby trees, leading to root damage, soil compaction, and mechanical injury to branches and trunks. Arborists can assess the potential impact of construction projects on trees and develop strategies to minimize damage. This may involve implementing protective barriers, root pruning, or relocating trees to safer locations.

Invasive Species

Invasive plants and pests pose a growing threat to tree health and biodiversity. Arborists play a crucial role in identifying and managing invasive species to prevent their spread and protect native ecosystems. This may involve removing invasive plants, treating affected trees with pesticides, or implementing biocontrol methods to suppress pest populations.

In conclusion, trees face a myriad of challenges that can impact their health and longevity. Arborists are trained professionals who specialize in the care and management of trees, and they play a vital role in diagnosing and addressing common tree problems. Whether it’s pest infestations, diseases, poor soil conditions, structural issues, environmental stress, construction damage, or invasive species, arborists have the expertise and tools to help trees thrive in urban and natural landscapes. By consulting with arborists and implementing their recommendations, property owners can ensure the health and beauty of their trees for generations to come.

Tips and Tricks from Seasoned Arborists

As custodians of our green spaces, seasoned arborists possess a wealth of knowledge and experience in nurturing and maintaining trees. Their expertise extends beyond mere pruning and removal; it encompasses a deep understanding of tree biology, environmental factors, and sustainable practices. In this article, we delve into the invaluable tips and tricks shared by seasoned arborists to enhance tree care and promote healthy urban forests.

Assess Before You Act

Seasoned arborists emphasize the importance of thorough tree assessment before any intervention. This involves examining the tree’s health, structural integrity, and environmental context. By understanding the tree’s condition and surrounding conditions, arborists can tailor their approach to meet specific needs, whether it’s pruning for structural stability or diagnosing diseases.

Prune with Purpose

Pruning is a fundamental aspect of tree care, but it’s not merely about removing branches arbitrarily. Arborists advocate for strategic pruning techniques that promote tree health and longevity. They recommend removing dead, diseased, or crossing branches to improve airflow and reduce the risk of pests and diseases. Additionally, selective pruning can enhance tree aesthetics and maintain balanced growth.

Timing Matters

Timing plays a crucial role in tree care activities such as pruning and fertilization. Seasoned arborists advise adhering to the appropriate timing based on tree species and local climate conditions. For example, pruning during dormancy in late winter or early spring minimizes stress on the tree and encourages vigorous growth in the following season. Similarly, fertilizing in the fall provides trees with essential nutrients to support root development during the dormant period.

Mulch Mindfully

Mulching is a simple yet effective practice that offers numerous benefits to trees. Arborists recommend applying a layer of organic mulch around the base of the tree, keeping it away from the trunk to prevent moisture buildup and potential rot. Mulch helps retain soil moisture, suppresses weeds, and regulates soil temperature, creating an optimal environment for root growth. However, it’s essential not to overmulch, as excessive mulch can suffocate roots and lead to moisture-related issues.

Water Wisely

Proper watering is critical for tree health, especially during periods of drought or extreme weather conditions. Arborists emphasize the importance of deep, infrequent watering to encourage deep root growth and drought resistance. They suggest watering early in the morning to minimize water loss through evaporation and avoid wet foliage overnight, which can increase the risk of fungal diseases.

Stay Vigilant Against Pests and Diseases

Vigilance is key to preventing and managing pest and disease infestations in trees. Seasoned arborists are trained to identify common pests and diseases and implement appropriate control measures. They advocate for integrated pest management approaches that prioritize cultural practices, such as promoting tree vigor through proper care, and resort to chemical treatments only when necessary and in accordance with environmental regulations.

Promote Biodiversity

Arborists recognize the importance of diverse tree species in urban landscapes. Monocultures are susceptible to widespread pest and disease outbreaks, whereas diverse plantings create resilience against such threats. Arborists encourage the selection of native and adapted tree species suited to local environmental conditions, considering factors such as soil type, sun exposure, and water availability.

Invest in Professional Expertise

While DIY tree care may seem appealing, seasoned arborists stress the value of professional expertise. Tree care involves inherent risks, and improper practices can cause irreversible damage to trees and property. Hiring certified arborists ensures that tree care activities are conducted safely and in compliance with industry standards and regulations.

In conclusion, the wisdom gleaned from seasoned arborists serves as a guiding light for effective tree care practices. By incorporating their tips and tricks into our approach, we can nurture vibrant urban forests that thrive for generations to come. Remember, when it comes to caring for trees, it’s not just about what you do—it’s about how you do it, and who you trust to do it right.

Choosing a Tree Lopper

Choosing a Tree Lopper


When you’re in the market for a lopper, you’ll want to be sure you purchase one that has the features you need. Whether you need a telescopic handle or a fixed-length lopper, you’ll want to make sure that you get the right tool for the job. In addition to finding a lopper that is the right length, you should also ensure that you pick one that has comfortable grips. Also, you’ll want to keep your lopper’s blades in good shape.

Compound vs fixed-length loppers

There are several different types of tree loppers. The key is to choose a model that feels right for you. Choosing the wrong one can lead to frustration and fatigue.

Whether you are trying to prune a tree or a shrub, using the correct tool will ensure the job is done quickly and easily. Choose a lopper that is comfortable to use and doesn’t strain your hands or wrists. Buying a pair of loppers that are designed to make cutting easier can also help reduce the likelihood of blisters and calluses.

If you want to cut thick branches, a compound action lopper will give you the maximum cutting power. These tools feature a ratchet mechanism, which increases the pressure applied to the blades. Ratchet loppers also have easy-grip handles that make them comfortable to use.

Telescopic vs fixed-length handles

When choosing a tree lopper, you should consider two important factors: handle length and weight. Lopper handles vary in length and can be telescopic or fixed. Longer handles provide greater leverage for cutting, and allow you to reach branches that are higher in the tree. But they can be awkward to handle. Shorter loppers are better for tight spaces.

Telescopic handles are usually made of tubular aluminum. They are not as sturdy as solid handles, and may bend or warp when cutting thicker wood. However, they can extend to up to 40 feet.

If you want a telescopic handle, look for one that features a locking mechanism. This is a good idea for anyone who wants to trim trees that are tall. You should also check for shock absorption.

ComfortGEL grips

The Corona flexDIAL limb and branch lopper is a lightweight pruning tool that will get the job done with relative efft. Its titanium coated blades are rust free and can stand up to heavy duty trimming. A rotor spring and ergonomic handles will keep you from breaking a sweat while sprucing up your property. These cutters are aimed at aspiring and seasoned tree enthusiasts alike. The best part is it’s a lot of fun.

One of the better rated loppers is the aforementioned Corona FlexDIAL Limb and Branch lopper. This is a well balanced tool designed for the seasoned professional. Its rotor spring and ergonomic handles keep you from breaking a sweat while tackling the toughest trimming tasks. Its oh so sexy looking handle will have your ladies swooning.


Many garden loppers are designed to be used with both hands, but they can dull if used too aggressively. To maintain the sharpness of the cutting edge, it is important to sharpen them occasionally. This will prevent rust and corrosion from forming on the blade.

First, you need to remove any caked-on residue on the blade. There are several ways to do this: you can sand the surface, wipe it with a rag, or apply a solvent such as oil or WD-40.

A good way to do this is to use a fine steel wool. This will remove any rust and debris and restore the sheen to the metal.

You can also use a handheld blade sharpener. These are handy for sharpening single-bevel blades. The advantage of using a handheld sharpener is that you don’t have to oil the tool, and it is less likely to clog or damage the blade.

Keeping the blades clean

When you use a tree lopper, you need to keep the blades clean. If you don’t do this, you risk spreading diseases, pests and other problems to your plants. A sharp edge is important, as it helps improve cutting efficiency. You can sharpen the blades yourself if you know how.

You can purchase a hand file for this purpose at your local hardware store. Alternatively, you can have your tools professionally sharpened. Make sure to wear protective gear when sharpening. It can take up to five or twenty strokes to restore the blade to its original sharpness.

Sharpening the blades is not hard, but it is messy. To begin, make sure to use a clean rag to wipe the blades. After several strokes, you can check to see if they are still sharp. Then, rinse them with water. If they are not, you can apply a light coat of WD-40 to them. This can help prevent rust and corrosion.


What You Need to Know About Tree Trimming

What You Need to Know About Tree Trimming


When you want to trim your tree, you are going to have to follow some guidelines and practices. These include pruning suckers, thinning the crown, and cleaning the top.

Thinning the crown

Tree crown thinning is a technique that improves the appearance, durability, and health of a tree. Crown thinning involves removing small, irregular branches from the canopy of a tree.

The benefits of crown thinning include improving light penetration, enhancing air movement, and reducing wind resistance. These qualities can be especially useful to trees growing in open or windy environments. Crown thinning can also help prevent storm damage.

Crown thinning is a good option for older trees because it helps to protect them from strong winds. It also stimulates the production of epicormic shoots, which are new limbs. This boosts the yield of flowers and fruit on the tree.

Crown thinning can also reduce the stress on the tree and the leverage it has on the structure. Over-crowded and overextended branches can cause mechanical stress and breakage. Also, excessive water-shoots are a potential threat to the health of sensitive plants.

A healthy, well-shaped tree can enhance the curb appeal of your home and add much-needed shade. Crown thinning can even increase the porosity of the tree’s canopy, which reduces the likelihood of storm damage.

Crown cleaning

Crown cleaning during tree trimming is a procedure of removing dead, diseased, or weakly attached branches from the tree’s canopy. This is done to improve the tree’s appearance and air flow. It also promotes healthy growth and keeps the tree safe from dangerous falling branches.

Trees are important for the health of the community and for the safety of people and property. In order to keep trees healthy and aesthetically pleasing, it is essential to trim them regularly.

One of the most common types of pruning is crown cleaning. The aim of this process is to reduce the number of limbs that are blocking a view and encroaching on structural elements.

Another important type of tree trimming is crown raising. With this technique, the lower limbs of the tree are removed, providing better clearance for roofs and cars.

Using a crown reduction to trim your tree can be a good way to ensure the safety of your home and the safety of your family. It is also a good way to make your tree more attractive and prevent wind damage.

Pruning dead and living branches

Pruning dead and living branches is a vital part of tree care. It helps to shape the tree and remove pests. Also, it improves airflow and sun exposure in the tree.

Dead branches can be a serious hazard to people, pets, and structures. They are also susceptible to damage from disease. The risk is particularly high during storm season. If left alone, they can splinter and snap off. Cutting them off before they cause damage will help your tree recover and grow stronger.

There are several ways to prune dead and living branches. First, identify what they are. This is important because the proper pruning technique will ensure that the branch does not come back.

You can find out which branches need to be removed by carefully inspecting the bark. A dead branch will have brownish or dry inner bark. Another sign that the branch is dying is shriveled buds.

In order to prune dead and living branches, you will need the right tools. Make sure to use sharp and clean tools to avoid causing unnecessary injury.

Pruning suckers

Tree pruning is important for a number of reasons. If done correctly, it can help keep a tree healthy and beautiful. However, it can also cause damage if you aren’t careful. One of the most common problems with trees is suckers. These unsightly and unbalanced growths can be difficult to remove.

When you trim a tree, you should cut away as much of the growth as possible. If you over-prune, you might be introducing suckers into the mix. This is especially true if you have a young tree.

The first step in removing suckers is to identify the source. Usually, the sucker begins at the base of the trunk. It can be tricky to find the root, but you can usually do it by digging. After you locate the root, you can use a blade or hatchet to get rid of it.

Pruning suckers should be done as soon as they appear. It is also a good idea to prune them during the spring when they are dormant.


How to Find a Reputable Tree Service


Whenever you need to hire a tree service company for a job, make sure that you choose a reputable one that will do the work at the right price. It’s also important to make sure that you have a list of references for the firm. This will help you to find out how the service was done and if it’s worth paying for. Also, if you don’t have a contractor that you can trust, you can call an emergency tree service to come to your home.


Pruning is one of the most important maintenance methods to keep a tree healthy. Not only does it preserve a tree’s health, it also helps promote the growth of the plant.

Proper pruning can give a tree a professional look. It can also help prevent pests and diseases from spreading. In addition, trees with proper pruning can boost fruit production.

Trees should be pruned annually. Generally, summer-flowering trees should be pruned in the winter, while fruit trees should be pruned in the spring.

The purpose of pruning is to encourage the growth of the tree, while removing diseased or dead branches. Also, it can keep the tree safe from falling branches, power lines, and other hazards.


Tree trimming is a key part of maintaining a tree’s health. The process includes pruning, removing dead or overgrown branches, and reshaping the tree. It helps preserve the tree’s overall health and shape, and is essential in preventing disease from spreading.

If your tree is encroaching on your property, or is too big for you to handle on your own, you may need to hire a professional for the job. Some trees require additional services such as root pruning or pest spraying.

There are a few factors that determine the cost of trimming. Location, season, and pests can all affect the price. For instance, if the crew has to climb the tree to perform the task, the cost will go up. However, if they can reach the tree from a truck, it will be less expensive.

Stump grinding

Stump grinding is the process of cutting a tree stump into small pieces. This process can be done on your own, or with a professional. If you choose to grind your own stumps, you can use a variety of tools to do the job.

Stump grinding is a useful method to remove a tree stump. You can leave the stump as is for aesthetic purposes, or you can give it a protective coating to protect it from the elements. Some companies offer sodding services after the stump is ground down. The process will also fill in the hole left behind.

Root removal

Whether you’re replacing a tree in your backyard or you need to clear a spot for a new one, you need to think about how you’ll remove the tree’s root system. A professional tree service can help you make the right decision. The process involves clearing out the stump, digging out the roots, and restoring the soil’s acidity.

You’ll need a specialized tree root removal tool, such as a chainsaw or stump grinder. Depending on the size of the tree, you may need to call a professional arborist to get the job done.

Getting rid of a stump is the least expensive way to get rid of the tree’s root system. However, if you’re dealing with a tree that has been dead for a while, it’s easier to go ahead and take it down yourself.

Emergency tree services

When you experience a sudden and unexpected fall of a tree, you may need emergency tree services to clean up the site and reduce the risk of further damage. Depending on the circumstances, you might need to hire an emergency tree service to remove the tree and cut off the power lines.

If your tree is sick, has uneven foliage or leaves, or if there are signs of ants or fungus on it, you should contact a certified arborist. They can help you identify the problem and can also help you prevent future problems.

A dead or dying tree can injure your family or cause property damage. These hazards can be prevented if you have regular tree care. Your ISA certified arborist can do a thorough inspection and make sure your tree is healthy.

Avoid door-to-door contractors

If you’re in the midst of rebuilding after a disaster, you’ll want to be wary of any door-to-door contractors. These are often scam artists looking to make a quick buck. They’ll use scarcity to their advantage.

Scammers often target seniors, disabled people, and property owners who do their own landscaping. Those in need of a bit of help should look for local companies.

The BBB has a tool to help you find a reputable contractor. You should also check with your local government agencies to see if the company is licensed.

A reputable tree service should have a few key components: a permit, good insurance, and a reasonable rate. For a big job, it’s always a good idea to get more than one bid.


What You Need to Know About Tree Service


Tree Service is a job that requires a lot of skill and knowledge. It involves trimming and deadwooding trees. It can also involve deep root feeding and tree removal. Before hiring a professional, make sure to find out what to look for.

Cost of tree removal

The cost of tree removal varies depending on the type of tree and the location of the tree. It also depends on the size, shape, and the difficulty of the removal. Trees that are located in close proximity to houses or buildings can take longer to remove.

A tree that is in a dangerous or decayed condition is more expensive to remove. It is often a good idea to hire a certified arborist to remove the tree. This may also require liability insurance.

The cost of removing a tree can vary, but most homeowners spend between $800 and $1,000 to have a tree removed. If the tree is too large for the space it will cost more.

Cost of deep root feeding

Deep root feeding for trees is important for keeping them healthy. In addition to helping them fight off disease, deep root fertilization will also help them recover from poor planting. It will also allow them to better absorb water.

A good professional tree company will be able to assess the condition of your trees and provide you with deep root fertilization services. You can even opt for a two-step tree program, which will ensure that your trees get the nutrients they need to grow and flourish.

Deep root feeding for trees involves the injection of a liquid fertilizer into the root zone. This is done by an ISA Certified Arborist who has advanced knowledge in the science of deep root soil injection.

Cost of deadwooding

Deadwooding is the process of cutting dead wood from a tree to improve its overall appearance and to minimize the weight that can cause it to fall. It is an important and effective step in the pruning process and helps to keep the tree looking its best.

Besides improving the look of a tree, deadwooding can also help to keep people and animals safe from the elements. Removing dead branches from trees can prevent a large branch from falling through your roof and causing property damage.

A tree is a crucial part of your home’s ecosystem. While a healthy tree may not fail during a hurricane or storm, it can be injured by a heavy gust. If your tree is dead, it may also have a higher risk of insect infestations. Additionally, the presence of rotted branches can also affect a tree’s health.

Cost of trimming leaves

The cost of trimming trees can vary dramatically. You can expect to pay anywhere from $200 to over $2000 for a single visit from a professional. To get a ballpark figure, you need to understand the size of your property, what type of trees you have, and what services you would like. In addition to tree trimming, you may need to do something more complex such as a landscaping or replanting job. Depending on the complexity of the task, you might need to hire an arborist.

A good rule of thumb is to budget no more than $1000 for an entire project. This is a small price to pay for the satisfaction of having a trimmed up yard.

Equipment and experience required

If you are thinking of starting a tree service business, you should consider investing in some of the latest equipment and technologies. It’s also important to have a clear understanding of the regulations and laws that govern your particular field. You’ll need to know how to obtain the proper permits and licenses, as well as the best ways to keep your workers safe.

One of the best ways to ensure the success of your tree service is to have a website. This will give your potential customers a way to request work from you. A professional website will also make your company look more legit.

Certifications required

There are several certifications that professionals in the tree care industry must obtain to be licensed. These credentials are important in ensuring the safety of consumers and the general public. In order to be certified, candidates must pass an exam and maintain their credentials.

The International Society of Arboriculture (ISA) is the most common organization that certifies arborists. This organization has an extensive exam that tests the candidate’s knowledge in various aspects of arboriculture. It includes topics on forestry, soil management, pests and diseases, and other areas.

Another ISA credential is the Licensed Tree Care Operator (LTCO). Candidates must meet certain experience and educational requirements to qualify.


Stump Grinding – Things to Keep in Mind Before You Get Rid of a Tree

Stump Grinding – Things to Keep in Mind Before You Get Rid of a Tree


Stump removal

If you have a tree in your yard that has a large or dead stump, you may want to consider getting rid of it. The process of stump removal can be costly and time-consuming, but it can also be a useful tool to improve the appearance of your property. It can also help you to eliminate disease-causing pests. However, there are some things to keep in mind before you get rid of a tree.

Stump removal requires heavy equipment and labor. The stump is usually dug out and removed, leaving a huge hole. If you plan on replanting a tree in that same spot, you need to dig a deeper hole to avoid destroying the roots and foundation of the new plant. The stump will also attract unwanted insects, which will spread diseases to other plants. In addition, a rotten stump can cause a safety hazard to people.

Stump grinding is a cheaper alternative to stump removal. Using a stump grinder will allow you to have the wood chipped up into mulch and used as a mulch for flower beds or garden plants. Unlike chemical stump removal, this method does not damage the soil. It is also a more eco-friendly option. You can use the chips as a soil amendment or mulch, and they make a great addition to your yard.

Generally, the only difference between stump removal and stump grinding is the level of force that is needed to remove a stump. The more force that is used, the higher the cost of the process. Most property owners only go through the whole process when they clear a lot for building purposes. If your stump is located near a structure, it can be very difficult to remove.

Depending on the size of your stump and how deep it is, the cost of removal will vary. Some stump grinding machines can remove stumps as low as 18 inches below the ground. If you need a larger hole, a more powerful machine is required. The cost will also depend on the amount of tree stumps that need to be removed.

Before deciding which method of stump removal is right for you, you should consider your budget. If you have a big stump that needs to be removed, you can spend hundreds of dollars. If the stump is smaller, it may not be as expensive. In most cases, the best choice is to just have the stump grinded out. This process is less expensive and less time-consuming, and it leaves the root system intact.

There are several companies that offer stump removal services. Some offer a discount for multiple stumps. If you want to hire a company, be sure that you are aware of any hidden liabilities. You should also make sure that you have the right skill to handle the equipment.

When removing a stump, be sure to wear protective clothing. You will be working with a rotating blade, so you must be careful to avoid injury. You should also protect yourself from flying debris, such as nails and old fence posts. To keep the process safe, you should put up a safety barricade around the area of the tree stump.


Becoming a Tree Surgeon

Becoming a Tree Surgeon


Having a job as a tree surgeon can be a great way to make a living. However, there are some things that you need to know before you apply for the job. This article will provide you with information about the education and salary requirements, as well as the dangers of the job.

Job description

Basically, a tree surgeon is a professional that specializes in the care and maintenance of trees. Their duties include cutting back roots, planting new trees and maintaining the health of existing ones. They also monitor damage, assess hazard risks and write reports on individual trees. They may also provide advice and assistance to the public.

Many people start in this field through an apprenticeship scheme. However, it is a career that can be taken on as a self-employed person. It is a physically demanding role that requires high levels of fitness.

The work involves using heavy equipment. This can include chainsaws, stump grinders and pole saws. In addition, tree surgeons are expected to wear protective clothing. They may be required to supervise other workers and liaise with external stakeholders such as contractors and electrical companies.

Education requirements

Whether you have a Bachelor’s or Master’s degree, becoming a tree surgeon is an attainable career goal. The main role of a tree surgeon is to assess the health and safety of trees and ensure that they are kept in a healthy state. This is a highly specialized and physically demanding job. In addition to maintaining a safe work environment, tree surgeons are expected to comply with health and safety legislation.

To become a tree surgeon, you can pursue a degree at a college or university or you can join an apprenticeship. These programs provide hands-on training and on-site job experience. You can also enroll in certificate programs for basic pest management, plant identification classes, and heavy equipment operation. You can even attend relevant courses while you work.


Depending on the location and the skills required, the salary of tree surgeons can vary considerably. Some of the most lucrative positions can earn more than one million dollars per year.

A tree surgeon’s job involves a wide variety of skills, including using heavy equipment, performing maintenance work, and cutting back roots. They also have to be comfortable working at heights. Aerial work can be a bit of a challenge, so they need to be trained to do it safely.

In the US, the average tree surgeon salary is around $47,838. This figure is based on data from ERI, an organization that conducts salary surveys.

A lot of the time, the hourly pay for a tree surgeon will be based on the amount of work they do each day. They may be required to do work at short notice, or on a whim. They might have to travel to different locations, and they could be exposed to hazardous conditions. The amount of hours they work varies by season, but the majority of work is done on Mondays through Fridays.

Health and safety risks

Keeping trees in good health is a crucial part of the arboriculture industry. This includes maintaining the vigilance of existing trees, as well as preserving new woodlands.

The role of tree surgeons is to identify hazards and carry out repairs. They are required to wear the right protective equipment. This may include boots, helmets, gloves, and eye protection. They may also use work at height equipment such as ropes and harnesses. The most important thing to remember is that it is essential to use the best certified arborist gear available to ensure safety.

As well as being physically demanding, the role of a tree surgeon involves working at heights. This is especially true if the job involves pruning trees. The HSE has an exhaustive list of tree work health and safety guidelines, which can help to keep you and your employees safe.

Dangers of the job

Performing tree surgery is not only a physically demanding job, but also dangerous. As with any job, there are a number of hazards, ranging from falls and tree damage to chemical fumes and sawdust from tools. Whether working as a contractor or a self-employed worker, it is essential to follow safety guidelines.

Generally, tree surgeons must be trained in the safe use of all equipment. Many of the tools used are heavy and require special training. They use a range of equipment, including chainsaws, axes, and stump grinders. They are also exposed to fumes from pesticides and fertilisers.

They also have to work in extreme weather conditions. In addition, they may need to travel from their base to their work site. They will usually have a full time schedule of 40 hours a week.


Avoid Tree Lopping

Avoid Tree Lopping


Having trees lopped can have many unintended consequences. Besides costing a lot of money and time, it can also lead to damage to your home or property.

Avoiding tree lopping

Whether you are a seasoned tree enthusiast or an amateur slash pruner, avoiding tree lopping is the best way to ensure your beloved green friend lives long and prospers. This is especially true if you have a large tree in your backyard that is taking over the landscape and is starting to pose a health hazard. The good news is that you don’t have to deal with a lopper; you can hire an arborist to perform the task for you.

Luckily, there are a lot of companies that offer tree lopping services in Perth. Most are happy to give you a free quote, and the best part is that they don’t overcharge you. Besides, you’ll be able to take advantage of their many years of expertise. Depending on your needs, you might be able to find an expert who can do the job in a day or two. With tree lopping in Perth, you’ll be able to get the service you need at a price you can afford.

Long-term problems

Regardless of whether you own a big tree or a small one, the best way to keep it healthy is through proper tree pruning. This will keep it safe from pests, disease and decay, as well as minimise the risks of personal injury and property damage.

Lopping a tree is a practice that has been around for a long time. It is often done for a variety of reasons. However, there are some significant long-term problems that could occur if the practice is not followed correctly.

First, a lopped tree will likely die due to disease or stress. In addition, it will lose its natural structure and character. It will also become prone to decay. This is because the branches of a lopped tree will have weak attachments. These weak attachments make the branches unstable and liable to break.

Another major problem with lopping is that it leaves a tree exposed to the full glare of the sun. This can result in dead branches and cankers. This can also attract insects and other pests. These bugs are attracted to the chemicals released by the exposed heartwood.


Depending on the size of the tree, the cost of tree lopping can range from $500 to over $2,000. Moreover, the location of the tree, the species of the tree and the difficulty of the task can all affect the price.

While some trees can be cut by DIY methods, larger and more complicated tree removal projects require more professional services. Those near electrical lines, sheds or other structures will need special tools and equipment to remove them.

While these services are not cheap, they are necessary for maintaining the beauty of the tree. They will also provide you with strategic advice on how to keep the tree in good condition.

While the cost of tree lopping can vary greatly, the average cost of tree lopping services is between $500 and $2,000. In addition, some companies charge a call out fee of $50 to $100. During the initial visit, an arborist will come to assess the tree and provide you with a quote.


State Regulations For Tree Removal

State Regulations For Tree Removal


Regardless of your reason for having a tree removed, you should be aware of some of the regulations that apply in your state. Having a tree removal company that follows these rules can help to ensure that the process goes smoothly.

Danger trees

Keeping dangerous trees away from your home is an important safety precaution. There are several ways to identify which trees are dangerous. Some common signs include large dead branches, cracked branches, emergence holes, discolored leaves, soft crumbly wood, and fungi.

Decayed trees should be removed quickly. The roots of a dying tree can encroach on structures and cause structural damage. They can also rot and die without warning. If left standing, a rotting tree can crush anything in its path.

Trees may become dangerous when they grow into electric lines. This can be a serious liability. If you have a tree that’s leaning or straddling your property line, it’s important to remove it as soon as possible.

If you’re not sure whether a tree is safe to cut down, have it inspected by a professional. A certified arborist will be able to tell you if the tree is a hazard.

While some trees are more prone to causing damage than others, most of them are dangerous. These are called hazard trees.

Stump removal

Stump removal for tree removal can be a daunting task. The process can be time-consuming and involve using potentially dangerous tools. It can also be expensive. You might want to consider hiring a company to take care of the job.

One of the simplest ways to remove a stump is to dig it out. You will need basic tools to perform this task. A shovel is a good tool for digging out a stump. It is also a good idea to use a tarp. The tarp will act as a moisture barrier.

Another way to remove a stump is to use a chemical. The chemical will speed up the decay process and help weaken the stump. Some of the chemicals used to remove a stump are toxic to pets and children. Often, potassium nitrate is used. If ingested, it can cause minor skin irritation.

You may be tempted to burn the stump to get rid of it, but you should avoid this. This is a risky practice, especially if the stump is near other plants. If you are concerned about the safety of your family, it is best to hire a professional.

Regulations in some states

Depending on the jurisdiction, it may be a requirement to obtain a permit before removing a tree. There are many states that have special regulations regarding the removal of trees. Here are a few:

Some state laws require permits for the removal of private residence trees. In these cases, the financial payment will fall on the property owner. This does not apply to trees on public property.

Some cities have ordinances that cover the planting and maintenance of trees. They specify the requirements for spacing, location, and the official species list. These rules may also contain penalties for violating them.

In some cases, the municipality can remove a tree that is in a dangerous condition. This is particularly the case if it is located near a roadway. It can also be a nuisance. It can interfere with the use of a homeowner’s property or cause damage to other trees.

A person who cuts down a tree without the permission of the city or owner may be subject to criminal charges. These include misdemeanors and felony crimes. In addition, he or she might be fined up to $1500 or imprisoned for up to six months.


Whether you’re dealing with a large or small tree, the cost of removal depends on a number of factors. You’ll need to determine what type of tree you have, the height of the tree, and the distance the tree is from your house. You’ll also have to consider the complexity of the root system.

The price for removing a large tree can vary from $500 to more than $1,000. Some trees are more complex than others, requiring specialized equipment to remove. These include oak trees, maple trees, and poplar trees. They can grow up to 100 feet tall and have very complex root systems.

The diameter of the tree’s trunk can also affect the cost. The average mature oak tree is 60 to 80 feet tall, but some can reach 100 feet or higher.

The cost to remove a large, mature tree can range from $800 to $1,700. This is because of the length of time it takes to cut it down. It may require a crane to lift it off the ground, which can increase the cost by $500.